Telecommunications Contractor in San Francisco CA – #1 C7 Licensed Contractor

Telecommunications Contractor in San Francisco CA – Commercial and Industrial

Commercial telecommunications cabling contractor providing network cabling, structured cabling, fiber optic cabling, Wi-Fi installation, low-voltage communications wiring, voice, data and AV infrastructure.

Looking for a telecommunications contractor in San Francisco CA? Our crews pull Cat6 and Cat6A to every drop, build out MDF and IDF rooms, fusion-splice single-mode and multimode fiber cable, and mount PoE wireless access points for businesses in every part of the city. We hold a California C-7 state license (CSLB #[NUMBER]) and hand you certification reports for every link before we leave the site.

Planning a move, buildout or network refresh? Get a site walk and itemized quote — call (628) 215-7235.

Request a quote

Telecommunications Cabling Services

Our technicians install, label and test every cable themselves, following the ANSI/TIA standards used for commercial cabling installations across the United States. Most projects combine two or three of these services in a single mobilization.

Network Cabling Installation

New drops, moves, adds and changes for copper Ethernet, terminated to keystone jacks and patch panels.

  • Cat6
  • Cat6A
  • Ethernet
  • Data Cabling
  • PoE
  • Patch Panels

Structured Cabling Installation

Telecom room design and buildout, from riser backbone to rack dressing and cable management.

  • MDF
  • IDF
  • Racks
  • Patch Panels
  • Backbone Cabling

Fiber Optic Cabling

Indoor, outdoor and riser-rated fiber optic cable installed, spliced and certified with Tier 2 OTDR traces.

  • Single-Mode
  • Multimode
  • Fusion Splicing
  • LC/SC
  • OTDR

Commercial Wi-Fi Installation

Predictive and on-site surveys, AP mounting, PoE switching and wireless coverage validation.

  • Wireless Access Points
  • PoE
  • Wi-Fi Infrastructure

Voice & Communications

Cabling and device setup for desk phones, overhead paging zones and door intercom stations.

  • VoIP
  • Paging
  • Intercom
  • Communications Cabling

Security System Cabling

Home-run PoE cabling for cameras, card readers, door contacts and electrified hardware.

  • IP Cameras
  • PoE Cameras
  • Access Control

AV & Conference Room Cabling

Display mounting, table-box and floor-box connectivity, and cabling for video conferencing systems.

  • Displays
  • Video Conferencing
  • AV Cabling

Telecommunications Infrastructure We Install in San Francisco

Most offices we wire now run on Cat6A horizontal cabling to support 10GBASE-T uplinks and high-wattage PoE for Wi-Fi 6E and Wi-Fi 7 access points. We route each cable through J-hooks or tray, hold bend radius and separation from electrical lines, and terminate on angled or flat patch panels with front and rear cable management.

In the telecom room, we’re mounting two- and four-post racks with seismic bracing anchored to slab, a real consideration in the city’s older concrete and steel-frame buildings. The communications backbone between the MDF and each IDF is typically OS2 single-mode or OM4 multimode fiber, fusion-spliced to pigtails in rack-mount enclosures and connected with LC duplex patch cords.

At the edge, we’re installing and configuring access points, IP cameras, card readers and VoIP handsets, then connecting each device back to a labeled switch port so your IT team can trace any drop from faceplate to panel.

  • Cat6
  • Cat6A
  • Fiber Optic
  • Ethernet
  • PoE
  • Patch Panels
  • Network Racks
  • MDF
  • IDF
  • Wireless Access Points
  • VoIP
  • Paging
  • Intercom
  • IP Cameras
  • Access Control
  • AV
Technical specifications for telecommunications media we install
Media / system Bandwidth / standard Max distance Typical use Test method
Cat6 (UTP)250 MHz; 1 Gbps (10 Gbps to 55 m)100 m channelWorkstations, VoIP phones, printersTIA-568.2-D permanent link certification
Cat6A (UTP/F/UTP)500 MHz; 10GBASE-T100 m channelWi-Fi 6E/7 APs, PoE++ devices, uplinksTIA-568.2-D with alien crosstalk margin
OS2 single-mode fiber1310 / 1550 nm; 10G–100G+10 km+ at 10 GbpsCampus and building-to-building backboneTier 1 loss + Tier 2 OTDR
OM4 multimode fiber850 nm; 10G to 400 m, 100G-SR4 to 150 m400 m at 10 GbpsMDF-to-IDF riser backboneTier 1 loss + Tier 2 OTDR
Fusion splice / connector≤0.3 dB per splice, ≤0.75 dB per mated pair (TIA-568.3-D)—Pigtails, LC/SC terminationsSplice loss estimate + OTDR event table
PoE (IEEE 802.3af/at/bt)15.4 W / 30 W / up to 90 W at the switch100 mAPs, PTZ cameras, intercoms, displaysLoad verification at device
Seismically braced 4-post network rack with 48-port Cat6A patch panels, horizontal cable managers, and a 1U LC fiber enclosure with fusion-spliced OM4 backbone
A 4-post, 45U rack anchored to slab with seismic bracing, holding 48-port Cat6A patch panels and a 1U LC enclosure for a 24-strand OM4 riser backbone. Each splice measured under 0.1 dB, well inside the 0.3 dB TIA-568.3-D limit.

Telecommunications Cabling for Commercial Facilities in SF

We bring a full range of cabling services to occupied buildings and new telecom construction alike, and we take on small jobs, like adding a handful of drops, as readily as full-floor buildouts. Noisy work is scheduled after hours so your business keeps operating.

  • Offices
  • Warehouses
  • Schools
  • Medical Facilities
  • Retail
  • Industrial Facilities
  • Commercial Buildings

Where our crews work: recent projects by neighborhood

Financial District tenant improvements

Full-floor Cat6A buildouts in Montgomery and California Street high-rises, tying new IDFs into the building’s riser fiber and coordinating cable pulls with property management and general contractors.

Mission Bay life science labs

Plenum-rated cabling and dense PoE camera coverage for biotech lab suites near UCSF Mission Bay, with separate network segments for lab instruments and corporate IT.

SoMa startup offices

Fast-turn moves into converted brick warehouses on Townsend and Brannan, where exposed ceilings call for clean cable tray runs and ceiling-mounted Wi-Fi 7 access points.

Fisherman’s Wharf and Union Square retail

POS drops, guest Wi-Fi and IP cameras for waterfront restaurants near our Beach Street base and flagship stores on Post and Stockton, installed overnight between closing and opening.

Ceiling-mounted Wi-Fi 7 wireless access point on a Cat6A PoE++ drop in a converted warehouse office with exposed cable tray
Wi-Fi 7 access point mounted at 12 ft on an exposed ceiling in SoMa, fed by a single Cat6A drop delivering up to 60 W of 802.3bt PoE and a 5 Gbps uplink.

Problems We Solve for IT Managers who have Customers in San Francisco

Unlabeled, tangled telecom rooms

We trace, tone and relabel existing drops, remove abandoned cable as the California Electrical Code requires, and re-dress racks so changes take minutes instead of hours.

Dead zones and slow Wi-Fi

We survey, relocate or add access points, and upgrade Cat5e runs to Cat6A so new APs get the PoE budget and multi-gig uplink they’re designed for.

Tight move-in deadlines

We coordinate with your general contractors, ISP and furniture installer so the network is installed, tested and live the day your team arrives.

No documentation for audits or warranties

Every cable installation closes out with as-built drawings, a port map and certification reports that qualify for manufacturer system warranties of up to 25 years.

Our Telecommunications Cabling Installation Process for Our San Francisco Customers

  1. Site walk and scope

    We walk the space, review floor plans, locate the MDF and IDF rooms, and confirm drop counts, device locations and pathway options.

  2. Itemized quote and design

    You receive a line-item quote with cable type, drop counts, rack elevations and a fiber backbone plan, so there are no surprises on the invoice.

  3. Pathways and cable pulls

    We install J-hooks, tray, sleeves and firestopping, then pull and bundle cable along code-compliant routes.

  4. Termination and mounting

    Copper is terminated to jacks and panels, fiber is fusion-spliced, and racks, APs, cameras and displays are mounted and connected.

  5. Testing and certification

    Every copper link and fiber strand is certified, and any failing link is reterminated and retested before handoff.

  6. Closeout documentation for customers

    We deliver as-builts, labeled port maps and test reports, and walk your IT team through the finished telecom rooms.

Telecommunications Cabling Testing & Certification

Our technicians’ experience with certification testers means copper is tested against TIA-568.2-D permanent link limits, measuring insertion loss, NEXT, return loss and length on every pair. Fiber gets Tier 1 optical loss testing with a light source and power meter, plus Tier 2 OTDR traces that show each splice, connector and the total link loss budget.

Results are exported directly from the tester, not retyped, and delivered as PDF reports organized by telecom room and patch panel.

OTDR trace of an OM4 multimode fiber backbone link showing fusion splice and LC connector loss events
OTDR trace from a 120 m OM4 riser link: fusion splice at 0.08 dB, LC connector pair at 0.41 dB, and total link loss of 1.12 dB against a 2.6 dB budget for 10GBASE-SR.

Telecommunications Contractor San Francisco Service Area

Our service area starts at our base near Fisherman’s Wharf and covers every neighborhood in the city, plus these Peninsula, East Bay and Marin cities:

Our contractors travel to every site with fully stocked vans, and you can read what customers say in our Google reviews. See every location on our service area page.

Request a Telecommunications Cabling Quote

Send a floor plan, drop count or a description of the problem, and we’ll schedule a site walk and return an itemized quote, usually within two business days.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get your network cabling installed, tested and certified on schedule.

Request a quote

Send us your project details