Tenant Improvement Cabling in San Francisco CA – #1 C7 Licensed Contractor

Tenant Improvement Cabling in San Francisco CA

We plan, install and certify the data, voice, Wi-Fi and security cabling for office, lab, retail and medical tenant improvements, working inside your general contractor’s schedule from demo through move-in day.

Need tenant improvement cabling in San Francisco CA? Our C-7 licensed crews remove the last tenant’s abandoned cable, rough in every drop before the walls close, tie your new suite into the landlord’s riser, and hand over a tested, labeled system the week before your team arrives. As a commercial cabling company, we’ve handled TI cabling projects from single suites to full floors. Timing is everything on a TI: cable that misses the rough-in window means opening finished walls later.

Starting a buildout? Bring us in during design and we’ll price cabling with the rest of the TI. Call (628) 215-7235.

Request a quote

What Our Commercial Cabling Covers on a TI

Every TI moves through the same construction phases, and each one has a cabling task that can’t be skipped or done late.

  • Drop planning with your architect

    We mark up the architect’s furniture and reflected ceiling plans with every data, voice, AP, camera and AV location, so cabling is priced and permitted with the rest of the TI.

    • Furniture Plans
    • Ceiling Plans
    • Drop Counts
    • AP Layout
  • Demo and abandoned cable removal

    The electrical code requires accessible abandoned cable to be removed. During demo we identify the previous tenant’s dead cable, tag what stays, and pull the rest out of ceilings and risers.

    • Cable Abatement
    • Demo Coordination
    • Ceiling Clearing
    • Code Compliance
  • Rough-in before walls close

    We set pathways, low-voltage brackets and pull strings, and run the plenum or riser cable type each space requires to every wall box and ceiling location after framing and before drywall or ceiling grid go in.

    • Low-Voltage Brackets
    • Pull Strings
    • J-Hooks
    • Wall Boxes
  • Riser and IDF tie-in

    New suites connect to the landlord’s MDF or an existing IDF. We coordinate riser space, sleeves and fiber pairs with property management and the property’s chief engineer.

    • Riser Space
    • Fiber Tie-In
    • Landlord MDF
    • Sleeves & Firestop
  • Telecom room changes

    A TI often moves or enlarges the IDF. We relocate racks, extend ladder rack, add grounding and re-home existing cable so nothing goes dark during the work.

    • IDF Relocation
    • Rack Moves
    • Grounding
    • Re-Homing
  • Trim-out, testing and cutover

    After paint and carpet, we install faceplates and jacks, terminate panels, certify every link and connect it to your switches before move-in day.

    • Faceplates
    • Termination
    • Certification
    • Switch Hookup

TI Cabling Timeline: Rough-In to Move-In

Most office TIs run eight to sixteen weeks from demo to occupancy. Cabling touches the job at six points, and on every cabling project the rough-in is the one that decides whether everything else goes smoothly. We build our schedule from the GC’s, so cable is in the walls before drywall and in the ceiling before the grid closes.

Tenant improvement cabling phases, timing and coordination
PhaseWhen it happensWhat we doWho we coordinate with
DesignBefore the building permit is issuedDrop plans, AP layout, telecom room design and itemized pricingArchitect, IT team, GC
DemoWeek 1–2 of constructionIdentify and remove abandoned cable; protect cable that staysGC, chief engineer
Rough-inAfter framing, before drywall and ceiling gridPathways, brackets, pull strings and cable pulled to every locationGC, electrician, framer
Cover inspectionBefore walls and ceilings closeConfirm cable support, separation from power and firestoppingGC, inspector
Trim-outAfter paint, ceiling tile and carpetFaceplates, jacks, panel termination and labelingGC, furniture installer
Test and cutoverFinal 1–2 weeks before move-inCertify every link, connect switches, verify phones, APs and camerasIT team, ISP
Open stud wall during a tenant improvement rough-in with low-voltage cabling pulled before drywall
Rough-in during a Financial District TI: low-voltage brackets set at 18 in above finished floor, two Cat6A cables pulled to each location with 12 in of service loop, all completed before drywall.

TI projects we cable

  • Second-generation office suites
  • Landlord spec suites
  • Full-floor buildouts
  • Expansions into adjacent space
  • Restacks and downsizing
  • Office-to-lab conversions
  • Retail and restaurant TIs
  • Medical and dental office TIs
  • Warehouse and distribution center TIs

TI Cabling Across the City

Financial District second-gen suites

Reworking floors on California and Montgomery Street, where the previous tenant’s cable fills the ceiling and has to come out before anything new goes in.

SoMa spec suites

Landlord-built move-in-ready suites in converted warehouses, cabled to a standard layout so the next tenant can plug in on day one.

Mission Bay lab conversions

Office floors converted to lab space, adding instrument drops, shielded cable near equipment and a separate IDF for lab systems.

Union Square retail TIs

Storefront buildouts on tight schedules, with POS, camera and guest Wi-Fi cabling roughed in during overnight shifts.

Working Within Landlord and Building Rules

Commercial buildings set rules for how tenant contractors work. Before we start, we review the landlord’s work letter and base-building standards, which typically cover approved cable types, riser allocation, labeling formats and when noisy work is allowed. We provide certificates of insurance, book freight elevators and loading docks, and schedule ceiling work in occupied buildings after hours. We also coordinate with the commercial electrical contractor so data cabling and new power circuits move through the electrical construction schedule without conflicts.

At closeout, as-built drawings and test reports go to both your IT team and property management, so the property has an accurate record of what’s in the riser when the next TI comes along.

How We Run a TI Cabling Project

  1. Site survey and pricing

    We start with a site survey, review architectural plans, walk the space with your GC and price the cabling scope line by line.

  2. Demo and abatement

    Abandoned cable is identified and removed, and any cable staying in place is tagged and protected.

  3. Rough-in

    Pathways, brackets and cable go in after framing, inspected before walls and ceilings close.

  4. Trim-out and termination

    Jacks, faceplates and patch panels are installed and labeled once finishes are complete.

  5. Testing and move-in cutover

    Every link is certified, switches are patched, and phones, APs and cameras are verified before your team arrives.

Commercial Network Testing & Closeout

Copper links are certified to TIA-568.2-D, and any fiber tie-ins get Tier 1 loss testing and OTDR traces. You receive PDF test reports, a port map and as-built drawings organized by room and panel, ready for your IT team, your landlord and the manufacturer warranty, and a clean record of your commercial network for future moves.

Labeled Cat6A patch panels in a relocated IDF rack after a tenant improvement
Relocated IDF at TI closeout: 144 Cat6A drops terminated on three 48-port panels, labeled to TIA-606 and certified the week before move-in, with zero failing links at handoff.

TI work often overlaps with these scopes. See the parent service overview for the full picture.

Tenant Improvement Cabling Service Area

We cable TIs in every neighborhood from the Marina to Bayview, plus these Peninsula, East Bay and Marin cities:

See every location on our service area page.

Request a TI Cabling Quote

Send your architectural plans, drop counts or your landlord’s work letter, and we’ll walk the space and return an itemized quote, usually within two business days. All work is performed under our California C-7 license.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get your TI cabling roughed in on time and certified before move-in.

Request a quote

Send us your project details