Conference Room AV Installation in San Francisco CA
We install the displays, cameras, microphones, speakers and table connections that make a room easy to use, from two-seat huddle rooms to 20-seat boardrooms.
Looking for conference room AV installation in San Francisco CA? Our C-7 licensed technicians start with room design: sizing the display, framing every seat with the camera, choosing microphones for the table and acoustics, and hiding every cable in the wall or floor. The result is a space where anyone can walk in, share a screen or join a video conference in seconds, and where remote attendees can see and hear everyone in the room.
Building new rooms or fixing ones nobody wants to use? Get a walkthrough and itemized quote. Call (628) 215-7235.
Request a quoteWhat We Install for Every Video Conference Room
Every room gets the same building blocks, scaled to its size and how your team works together.
-
Display and projector mounting
Flat-panel displays, LED walls and projectors mounted at the right height on properly backed walls, with power and network behind the screen.
-
Table connectivity and floor boxes
Table boxes with USB-C, HDMI and power, fed from floor boxes or wall plates, so guests can plug in without cables across the floor.
-
Wireless presentation
Button and app-based screen sharing so anyone can present from a laptop, tablet or phone without hunting for adapters.
-
Conferencing cameras and microphones
Camera bars and PTZ cameras placed to frame every seat, with table or ceiling microphones chosen for the table shape and room acoustics.
-
Room control and scheduling
Touch controllers that start a call with one tap, and scheduling panels outside the door that show when the room is free.
-
Sound and acoustics
Ceiling or display-mounted loudspeakers and a DSP tuned for the room, plus advice on panels and treatments for echoey rooms.
Typical Setups by Room Size
Room size drives almost every design decision: how big the display needs to be, whether one camera can see everyone, and whether table microphones are enough. Here’s where we usually start, before adjusting for your room’s shape, lighting and acoustics.
| Room type | Seats | Display | Camera | Microphones | Connectivity |
|---|---|---|---|---|---|
| Huddle room | 2–4 | 55–65 in display | Camera bar with built-in mics | Built into camera bar | USB-C cable at the table, wireless sharing |
| Small room | 4–8 | 65–75 in display | Wide-angle camera bar | Camera bar or one table mic | Table box with USB-C and HDMI |
| Medium room | 8–12 | 75–86 in display | Camera bar or PTZ with auto-framing | Ceiling mics with DSP | Table box, wireless sharing, touch controller |
| Boardroom | 12–20 | Dual 86–98 in displays or LED wall | Multiple PTZ cameras with speaker tracking | Ceiling mic array with DSP | Floor boxes, touch control, scheduling panel |
| Training room | 20+ | Projector or LED wall, plus confidence monitor | Presenter and audience cameras | Wireless presenter mic and ceiling mics | Lectern, wall plates and room control |
How we install each room
Before drywall goes up, we add backing for heavy displays (an 86-inch screen and mount can weigh well over 100 pounds), set power and two to four Cat6 drops behind each screen, and run conduit to the table so nothing is visible later. In finished rooms, we use in-wall pathways where possible and paintable raceway where walls are concrete or brick. Displays are mounted so the center of the screen sits near seated eye level, cameras go just above or below the screen, and floor boxes are cored only after the building engineer approves the location.
Room AV Projects Across the City
Financial District boardrooms
Dual-display boardrooms with ceiling microphone arrays and speaker-tracking cameras for corporate law and finance firms meeting clients in person and online.
SoMa huddle room rollouts
Dozens of identical huddle rooms built to one standard, so every room works the same way and IT can support them remotely.
Mission Bay training rooms
Projectors, presenter cameras and wireless microphones for life science companies running onboarding and seminars.
Jackson Square historic buildings
Rooms in brick and timber buildings, with surface raceway and freestanding display carts where walls can’t be opened.
Our Room AV Process
Room walkthrough
We measure each room, check walls, ceilings, windows and acoustics, and confirm how people will use it and connect.
Design and equipment
We recommend a setup for each room size, standardizing where possible, with an itemized equipment list and quote.
Rough-in
Backing, power, conduit, floor boxes and network and AV cabling go in before walls and ceilings close.
Mounting and setup
Displays, cameras, microphones, loudspeakers and controllers are mounted, connected and configured as one system.
Testing and training
We test every input, call and microphone, tune the room’s sound, and show your team how to start a call with one touch.
Related Audio-Visual Solutions
Room hardware depends on good cabling and the right collaboration platform. Together they give your business AV solutions that improve communication between people in the room and those joining remotely. See our main AV overview page.
- AV Cabling: HDMI, HDBaseT, USB and loudspeaker cabling run before the room is finished.
- Conferencing setup: Teams Rooms and Zoom Rooms configured on the hardware we install.
Room AV Service Area
We install room AV in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Room AV Quote
Send a floor plan, the number and size of your rooms, and the platform you use, and we’ll schedule a walkthrough and return an itemized quote, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get rooms that are easy to use and look and sound right.
Request a quote