Network Cabling Installation in San Francisco CA – #1 C7 Licensed Contractor

Network Cabling Installation in San Francisco CA – New Drops, Moves & Upgrades

We install new network cabling in San Francisco CA for offices, warehouses, schools, clinics and retail spaces: Cat6 and Cat6A drops pulled from your telecom room to every desk, access point and camera, terminated, labeled and certified before we leave.

From a single added drop to a 600-run tenant buildout, our C-7 licensed crews handle the full installation: pathways, cable pulls, terminations, rack work and testing, scheduled around your business hours.

Need new drops or a full office wired? Get an itemized installation quote — call (628) 215-7235.

Request a quote

Network Cabling Installation Services

Pick the installation service that fits your project. Each one is installed by our own technicians and certified on completion.

Commercial Cabling Projects We Handle

Most of our installation work falls into one of four project types. Each is scoped differently, so we price them differently too.

New construction and buildouts

Complete horizontal cabling for a new office or tenant floor, coordinated with your general contractor so cable is pulled before ceilings close.

Moves, adds and changes

Adding drops for new hires, relocating desks or reconfiguring a room without disrupting the cabling that’s already working.

Cat5e to Cat6A upgrades

Replacing aging cable so new Wi-Fi 7 access points and multi-gig switches get the bandwidth and PoE they need.

Cleanup and abandoned cable removal

Tracing and removing dead cable from ceilings, as the California Electrical Code requires, then re-dressing what stays.

From Site Survey to Termination: How We Install

Every project begins with a site survey. We walk the space with your floor plan, locate the MDF and IDF rooms, measure routes to confirm every link stays under 90 m, and note ceiling types, firewalls and any areas that need after-hours access.

Next come the pathways. J-hooks are mounted every four to five feet along the route, with sleeves and firestopping where cable passes through rated walls. Supporting cable properly keeps it from sagging onto ceiling tiles and protects its performance over time.

Cable is then pulled in bundles from the IDF, with pull tension kept under 25 pounds and bend radius at four times the cable diameter. We leave a service loop at both ends so future moves don’t require a new run.

Finally, we’re terminating each cable to a T568B keystone jack at the outlet and punching it down on a patch panel in the rack. Both ends are labeled to TIA-606, and the run is tested and certified before it’s connected to your switch.

Bundles of Cat6A network cable supported on J-hooks above a commercial drop ceiling
Cat6A bundles supported on J-hooks spaced every 4 to 5 ft, kept 12 in from light fixtures and limited to 24 cables per bundle to control PoE heat rise.

Network Cable Installation Standards We Follow

Network cable installation standards and limits
Installation factor Requirement Standard Why it matters
Permanent link length90 m maximumTIA-568.2-DLeaves 10 m for patch cords in a 100 m channel
Bend radius4× cable diameter (installed)TIA-568.2-DTight bends degrade crosstalk and return loss
Pull tension25 lbf maximumTIA-568.2-DOverpulling stretches pairs and fails certification
Support spacingJ-hooks every 4–5 ftTIA-569-EPrevents sag and stress on the cable
Untwist at termination0.5 in maximumTIA-568.2-DKeeps pair twist intact for Cat6/Cat6A performance
LabelingBoth ends, unique IDTIA-606-CEvery drop traceable from faceplate to panel

Where We Install Network Cabling

  • Office workstations and desks
  • Conference rooms and floor boxes
  • Ceiling access point locations
  • Exterior and interior camera points
  • Warehouse racks and scanners
  • Classrooms and labs
  • Exam rooms and nurse stations
  • Retail POS counters
  • Telecom rooms and IDFs

Recent installation work by neighborhood

Presidio office conversions

Installing Cat6A in converted historic Army buildings, routing cable to avoid altering protected walls and trim.

Bayview warehouses

Long runs to scanners, cameras and access points in distribution warehouses, with IDFs placed to keep every link under 90 m.

Mission District coworking

Moves, adds and changes for coworking floors on Valencia and Mission, where member turnover means frequent reconfigurations.

Hayes Valley storefronts

Compact retail installs for POS, cameras and guest Wi-Fi in narrow storefronts with limited ceiling space.

Dual-port network faceplate with RJ45 keystone jacks at a workstation wall outlet
Dual-port faceplate with Cat6 keystone jacks labeled 2B-047 and 2B-048, matching ports 47 and 48 on panel B in the second-floor IDF.

Network Cabling Service Area

We install network cabling across the city and in these nearby cities:

See every location on our service area page.

Request a Quote From a Licensed Cabling Installer

Send a floor plan or drop count, and we’ll schedule a site walk and return an itemized quote, usually within two business days.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get your new drops installed, labeled and certified on schedule.

Request a quote

Send us your project details