Overhead Paging Systems in San Francisco CA – #1 C7 Licensed Contractor

Overhead Paging Systems in San Francisco CA

We design and install PA setups for offices, warehouses, schools and retail: ceiling and horn speakers, amplifiers and zones, tied into your VoIP phones so anyone can make an announcement from a desk phone.

Need overhead paging systems in San Francisco CA? Our C-7 licensed technicians measure the noise in each area, lay out speakers so every announcement is clear without blasting the people underneath, run the low-voltage electrical wiring, and connect everything to your phone platform with a simple dial code. We also add zones, priority override for emergencies, school bells, background music and sound masking where you need them.

New PA, more zones or a link to your new VoIP phones? Get a walkthrough and itemized quote. Call (628) 215-7235.

Request a quote

IP, Analog or Hybrid: Which PA Setup Fits Your Space

There are three ways to build a PA system today. The right one depends on how big the space is, how much wiring is already in place and which phone platform you use.

IP / SIP speakers

Each speaker connects to a network switch with one Cat6 cable for both power and voice, and registers with your phone platform like an extension. Easy to add zones and manage remotely. Best for offices, schools and new buildouts.

Analog 70 V

A central amplifier drives many speakers over a single pair of speaker wire, connected to your phones through a page port or SIP gateway. Cost-effective for warehouses and large open areas with many speakers.

Hybrid setups

IP speakers in offices and an amplifier with horns on the warehouse floor, both triggered from the same phones. Common in buildings with mixed office and industrial space.

What We Install

  • Ceiling speakers

    Drop-in and recessed speakers for offices, clinics, schools and retail, spaced for even, clear coverage with no loud spots under each speaker.

    • Drop-In Tile
    • Recessed
    • Even Coverage
    • Plenum Rated
  • Horn and outdoor speakers

    Weather-resistant horns for warehouses, loading docks, parking areas and yards, aimed down long aisles to cut through machine noise.

    • Horn Speakers
    • Loading Docks
    • Outdoor Rated
    • High Output
  • Amplifiers and 70 V lines

    Amplifiers sized to the total speaker load, with 70 V lines that let one amplifier drive dozens of speakers over long runs.

    • Amplifiers
    • 70 V / 25 V
    • Speaker Taps
    • Volume Adjustment
  • SIP gateways and IP speakers

    SIP gateways and PoE speakers that register with your phones like an extension, so any handset can make an announcement with a dial code.

    • SIP Gateways
    • PoE Speakers
    • Dial Codes
    • Hosted VoIP
  • Zones and priority

    Separate zones for each floor, department or area, plus all-call, and priority override so emergency messages always get through.

    • Zones
    • All-Call
    • Priority Override
    • Zone Groups
  • Bells, music and notification

    Class-change bells and schedules for schools, background music for retail, and tie-ins to mass notification and alarm panels.

    • School Bells
    • Background Music
    • Mass Notification
    • Scheduling

Speaker Types & Coverage Guidelines

For an announcement to be understood, it needs to be roughly 10 to 15 dB louder than the background noise in the space. Quiet offices need gentle, evenly spaced ceiling speakers. Loud warehouses need high-output horns aimed down each aisle. We measure noise levels during the walkthrough and choose equipment from there.

PA speaker types, typical coverage and wiring
Speaker typeBest forTypical layoutWiringPower
Drop-in ceiling speakerOffices, clinics, classroomsSpaced about 1.5 to 2 times the ceiling height apart70 V speaker wire or Cat6 (IP)0.5–4 W tap, or 802.3af PoE
Recessed or pendant speakerOpen ceilings, lobbies, retailHung or recessed in a grid over the floor area70 V speaker wire or Cat6 (IP)1–8 W tap, or PoE
Wall speakerCorridors, break rooms, stairwellsOne per small room or every 25–40 ft of hallway70 V speaker wire or Cat6 (IP)1–8 W tap, or PoE
Horn speakerWarehouses, docks, outdoor yardsMounted high and aimed down aisles or across open floor70 V speaker wire, often in conduit5–30 W tap
IP horn speakerDocks and outdoor areas on an IP setupSame as horn speakersOutdoor-rated Cat6802.3at PoE+
Control panel room for building alarm and paging equipment
Warehouse zone: six 15 W horn speakers on 70 V lines, mounted 20 ft high and aimed down racking aisles to deliver announcements about 12 dB above forklift and conveyor noise.

Spaces we cover

  • Warehouses and distribution centers
  • Manufacturing floors
  • Schools and campuses
  • Offices and call centers
  • Retail stores
  • Hotels and back-of-house
  • Medical offices and clinics
  • Parking garages and yards

PA Projects Across the City

Bayview distribution centers

Horn speakers and dock zones on 70 V lines, connected through a SIP gateway so supervisors make announcements from their handsets.

Sunset and Richmond schools

IP ceiling speakers in every classroom with zones by building, class-change bells on a schedule and emergency all-call.

Union Square retail

Pendant speakers on the sales floor carrying background music, with announcements that automatically duck the music and play over it.

Mission Bay labs

Building-wide IP announcements and emergency messages, zoned separately for lab floors and offices.

How We Install a PA System

  1. Walkthrough and noise check

    We measure background noise in each area, note ceiling heights and confirm where announcements will start.

  2. Zone and speaker layout

    We draw speaker locations and zones, size amplifiers or PoE switches, and choose IP, analog or hybrid.

  3. Wiring and mounting

    Speaker wire or Cat6 is run, speakers and amplifiers are mounted, and every zone is labeled.

  4. Phone integration

    We connect your VoIP platform, set dial codes for each zone and all-call, and add priority override.

  5. Tuning and training

    We set volume and speaker taps zone by zone, test every announcement, and show your staff how to use it.

Announcements work best alongside well-wired phones. See our main voice page for the full overview. For PA setups in meeting spaces, see our AV wiring page.

Commercial PA Systems Service Area

We install PA setups in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:

See every location on our service area page.

Request a PA Quote

Send a floor plan, the areas you need to reach and your phone platform, and we’ll schedule a walkthrough and return an itemized quote, usually within two business days.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get announcements heard clearly in every zone, from any phone.

Request a quote

Send us your project details