Structured Cabling in San Francisco CA
We design, install, terminate and certify structured cabling systems for commercial buildings, from the entrance facility and MDF to every IDF, horizontal run and work-area outlet.
Need structured cabling in San Francisco CA? Our C-7 licensed low voltage crews build out telecom rooms, pull Cat6A horizontal cabling, run fiber backbones between floors, and label every port so your IT team can trace any drop in seconds. One contractor handles the whole system, so there’s no finger-pointing between the cabling, rack and fiber trades.
Building out, moving or cleaning up a telecom room? Get a site walk and itemized quote. Call (628) 215-7235.
Request a quoteStructured Cabling Services
Choose from the cabling services below to fit your project. Most buildouts combine two or more, such as a tenant improvement paired with a new MDF and IDF build-out.
-
Structured Cabling Installation
Horizontal and backbone cabling designed to ANSI/TIA-568, routed through J-hooks or ladder rack, terminated on patch panels and labeled to TIA-606.
View structured cabling installation -
Commercial Structured Cabling
Multi-floor and multi-tenant systems with riser backbones, consolidated telecom rooms and building entrance facilities for offices, labs and warehouses.
View commercial structured cabling -
New Office Cabling
Drop plans per workstation, conference room and access point, coordinated with your general contractor so cable goes in before ceilings close.
View new office cabling -
Tenant Improvement Cabling
TI buildouts that remove abandoned cable, tie new IDFs into the landlord’s riser and meet building-specific rules for after-hours work.
View tenant improvement cabling -
Office Relocation Cabling
Pre-wiring the new space, cutting over phones and network over a weekend, and decommissioning the old site so your team loses no working days.
View office relocation cabling -
MDF / IDF Build-Out
Telecom rooms built from bare walls: racks, ladder rack, seismic bracing, TIA-607 grounding, power and fiber patching between floors.
View MDF / IDF build-out
What a Structured Cabling System Includes
A structured cabling system replaces point-to-point wiring with a standardized, documented layout. Instead of running cable wherever it’s needed, we install a hierarchy: the carrier’s lines enter the building at the entrance facility, connect to core switching in the main distribution frame (MDF), travel up the riser on fiber backbone to an intermediate distribution frame (IDF) on each floor, and fan out as horizontal copper to desks, access points and cameras, with voice cabling for desk phones running on the same Cat6A plant.
Because every link follows the same standards and a documented cabling design, adding a workstation means patching a port rather than pulling new cable. Moves and changes take minutes, troubleshooting starts with a label instead of a guess, and the system supports network upgrades for 15 years or more.
We coordinate with electrical contractors on dedicated power and grounding for each telecom room, and keep low voltage pathways separated from electrical circuits as the code requires.
| Subsystem | What we install | Typical media | Governing standard |
|---|---|---|---|
| Entrance facility | Carrier demarc extension, surge protection, entrance conduit | OS2 fiber, Cat6 | TIA-568.0-E, NEC Article 800 |
| Equipment room (MDF) | Racks, cabinets, ladder rack, core patching, grounding busbar | OS2 / OM4 fiber, Cat6A | TIA-569-E, TIA-607-D |
| Backbone cabling | Riser fiber and copper between MDF and each IDF | OM4 multimode, OS2 single-mode | TIA-568.3-D |
| Telecommunications room (IDF) | Wall or floor racks, patch panels, horizontal cable managers | Cat6A patch panels, LC fiber enclosures | TIA-569-E |
| Horizontal cabling | Runs from IDF to each outlet, max 90 m permanent link | Cat6 or Cat6A, plenum-rated (CMP) | TIA-568.2-D |
| Work area | Faceplates, jacks, floor boxes, AP and camera drops | Cat6A keystone jacks, patch cords | TIA-568.0-E, TIA-606-C |
Buildings and spaces we cable
- Multi-tenant office towers
- Single-tenant headquarters
- Life science and lab buildings
- Warehouses and distribution centers
- Medical offices and clinics
- Schools and campuses
- Retail and hospitality
- Historic and masonry buildings
Structured Cabling Projects Across the City
Financial District high-rise TIs
Full-floor tenant improvements on Montgomery and Market Street, tying new IDFs into the building’s shared riser and scheduling cable pulls around freight elevator reservations.
Jackson Square historic offices
Brick and timber buildings where open ceilings and seismic retrofits call for surface raceway, exposed ladder rack and careful routing around new steel bracing.
Mission Bay lab buildings
Plenum-rated horizontal cabling and separate IDFs for lab instruments and corporate IT in life science suites, built to the landlord’s base-building standards.
SoMa and Dogpatch warehouse conversions
Open-plan offices in converted industrial space, where cable tray runs overhead and floor boxes feed workstations in the middle of the room.
How We Install Structured Cabling
Survey and design
We walk the space, measure cable paths and confirm the 90 m horizontal limit for every outlet, then place the MDF and IDFs to keep runs short.
Itemized proposal
You get drop counts, rack elevations, a backbone diagram and a line-item price before any work starts.
Telecom room build-out
Racks, ladder rack, grounding and power go in first, so cable has a finished destination.
Network cabling and ethernet cable pulls
Each ethernet cable and backbone fiber strand is pulled, dressed, terminated and labeled floor by floor.
Certification and handoff
Every link is tested, and you receive as-built drawings, a port map and certification reports.
Structured Cabling Testing & Documentation
Each copper permanent link is certified against TIA-568.2-D limits for insertion loss, NEXT, return loss and length. Backbone fiber gets Tier 1 loss testing and Tier 2 OTDR traces. Results come straight from the tester as PDF reports, organized by telecom room and patch panel, and qualify the installation for manufacturer system warranties of up to 25 years. Every cable installation is reviewed by a lead technician before handoff.
Structured Cabling Service Area
We provide cabling services in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Structured Cabling Quote
Send a floor plan, drop count or a description of the space, and we’ll schedule a site walk and return an itemized quote, usually within two business days. We carry general liability and workers’ compensation insurance, and we scale our low voltage cabling solutions from a single suite to an entire building.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get a structured cabling system that’s installed, labeled and certified on schedule.
Request a quote