Fiber Optic Cabling in San Francisco CA
We install, splice, terminate and certify single-mode and multimode fiber for commercial networks, from riser backbones between telecom rooms to campus links between buildings.
Looking for fiber optic cabling in San Francisco CA? Our C-7 licensed technicians pull fiber through risers, conduit and ceilings, fusion-splice pigtails and building entrances, mount labeled enclosures in your racks, and hand you Tier 1 and Tier 2 test results for every strand. One crew handles the whole link, so there’s no gap between the installer, the splicer and the tester.
Need a new backbone, a campus link or a fiber repair? Get a site walk and itemized quote. Call (628) 215-7235.
Request a quoteFiber Optic Cabling Services
Every fiber link goes through the same four stages. We offer each one on its own, or as a complete install-to-certification package.
-
Fiber Optic Installation
Indoor, riser and outside plant fiber pulled through innerduct, conduit and ladder rack, with bend radius protected and spare strands left for growth.
View fiber optic installation -
Fiber Optic Splicing
Fusion splicing for pigtails, building entrances and cable repairs, with splice loss typically under 0.1 dB and every splice protected in a tray or closure.
View fiber optic splicing -
Fiber Termination
LC, SC and MTP/MPO connectors terminated, polished or spliced on, then mounted in labeled rack enclosures and patch panels.
View fiber termination -
OTDR Testing & Certification
Tier 1 light source and power meter loss testing plus Tier 2 OTDR traces that locate every splice, connector and fault along the link.
View OTDR testing & certification
Fiber vs Ethernet Cable: Where Each Fits
Copper handles the last 90 meters to each desk, access point and camera. Fiber carries everything else: the backbone between your main distribution frame and each floor’s IDF, links between buildings on a campus, and high-speed connections between racks in a server room. It carries 10, 40 and 100 Gbps over distances copper can’t reach, and because it’s made of glass, it’s immune to the electrical interference found near elevators, motors and lab equipment.
Most of our projects pair OM4 multimode for backbones inside a building with OS2 single-mode for longer runs and links to other buildings. We install it in innerduct or armored jacket where it needs protection, keep bends wider than the cable’s minimum radius, and leave spare strands in every run so the next upgrade doesn’t mean pulling new cable.
| Fiber type | Core / jacket color | Wavelength | 10 Gbps reach | 100 Gbps reach | Typical use |
|---|---|---|---|---|---|
| OM3 multimode | 50 µm, aqua | 850 nm | 300 m | 100 m (SR4) | Existing backbones, short in-building links |
| OM4 multimode | 50 µm, aqua or violet | 850 nm | 400 m | 150 m (SR4) | Riser backbones, MDF-to-IDF, server rooms |
| OM5 multimode | 50 µm, lime green | 850–953 nm (SWDM) | 400 m | 150 m (SR4) | Data rooms planning for wavelength multiplexing |
| OS2 single-mode | 9 µm, yellow | 1310 / 1550 nm | 10 km (LR) | 10 km (LR4) | Campus links, long risers, carrier circuits |
| Armored / outside plant | Single-mode or multimode, black outer jacket | Per fiber type | Per fiber type | Per fiber type | Underground conduit, building-to-building |
Facilities we wire with fiber and network cable
- Multi-floor office towers
- Corporate campuses
- Life science and lab buildings
- Server rooms and data closets
- Hospitals and medical offices
- Schools and universities
- Warehouses and distribution centers
- Hotels and hospitality
Projects From Your Local Fiber Cabling Installer
Financial District riser backbones
OM4 and OS2 backbones run up shared risers in Market and California Street towers, connecting a tenant’s MDF to IDFs on every leased floor.
Mission Bay campus links
Armored single-mode fiber through underground conduit between lab buildings, spliced at each entrance and certified end to end.
Embarcadero pier offices
Fiber routed through the long, open spans of converted waterfront piers, where copper runs would exceed the 90 m limit.
SoMa server rooms
MTP/MPO trunks and high-density LC panels linking racks for 40 and 100 Gbps switch uplinks in tech company data rooms.
How We Install Fiber Optic Cable
Survey and link design
We map the route, measure distances, choose fiber type and strand count, and calculate a loss budget for each link.
Pathway and cable installation
Innerduct, conduit and ladder rack go in first, then fiber is pulled under its tension rating with bend radius protected at every turn.
Splicing and termination
Pigtails are fusion-spliced or connectors terminated, then strands are dressed into labeled enclosures and adapter panels.
Testing and certification
Every strand gets Tier 1 loss testing and a Tier 2 OTDR trace, checked against the loss budget.
Documentation
You receive strand maps, test reports and as-built drawings for your IT team and building management.
Fiber Optic Cabling Service Area
We install fiber in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Fiber Optic Cabling Quote
Send a floor plan, the locations you need to connect or a description of the problem, and we’ll schedule a site walk and return an itemized quote, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get fiber that’s installed, spliced and certified on schedule.
Request a quote