Cat6A Cabling Installation in San Francisco CA – 10G & PoE++ Ready
We provide Cat6A cabling installation in San Francisco CA for offices, labs, schools and medical facilities: 500 MHz Category 6A cable pulled, terminated and certified to run 10 Gbps over the full 100-meter channel and power Wi-Fi 7 access points with up to 90 W of PoE.
As low voltage cabling contractors in San Francisco, offering structured cabling services, we recommend Cat6A for any new structured cabling system that will be in service for years. It costs more per drop than Cat6, but it’s the only twisted-pair category that carries 10GBASE-T data transmission to every corner of a floor and stays cool in large PoE bundles, so your network is ready for the future.
Planning Wi-Fi 7, a new floor or a Cat5e upgrade in San Francisco CA? Get an itemized Cat6A cabling quote — call (628) 215-7235.
Request a quoteCat6A Cabling Services We Install
Our Cat6A cabling services cover everything from a single drop to a full structured cabling buildout for San Francisco offices, labs and warehouses.
- New Cat6A dropsSingle drops, room adds and full-floor network wiring from the IDF to workstations, ceilings and floor boxes.
- Cat5e and Cat6 upgradesRemoving legacy cables and replacing them with Cat6A, including the abandoned-cable removal the electrical code requires.
- Wi-Fi 6E and Wi-Fi 7 AP dropsSingle or dual Cat6A cabling runs to each wireless access point for multi-gig uplinks and 802.3bt power.
- Shielded F/UTP installationScreened Cat6A cabling with shielded jacks and bonded panels for labs, imaging rooms and industrial floors.
- PoE camera and device runsCat6A cabling to PTZ cameras, lighting controllers, digital signage, intercoms, access control and building management systems.
- 10G uplinks and consolidation pointsShort Cat6A cabling trunks between racks and zone enclosures, tying horizontal copper into your fiber backbone.
How We Install and Terminate Cat6A Cable
Cat6A cabling is thicker and stiffer than Cat6, so a good install starts with the pathway. A typical U/UTP Cat6A cable measures about 0.25 to 0.30 inches across, compared with roughly 0.22 inches for Cat6, which means larger J-hooks, wider cable tray and conduit sized to stay under 40 percent fill. We space J-hooks no more than five feet apart and keep pulling tension under 25 pounds so the pair twists stay intact.
When we’re mounting and routing cables, we hold the bend radius to at least four times the cable diameter, maintain separation from electrical feeders and fluorescent fixtures, and avoid tight zip ties that can crush the jacket and cost you alien crosstalk margin. Bundles feeding PoE devices are kept loose with Velcro and split into smaller groups so heat can escape, following TIA TSB-184-A guidance for 802.3bt power.
All cables are terminated to Cat6A-rated keystone jacks and panels from the same manufacturer as the cable, which keeps the structured cabling system eligible for a manufacturer warranty. On shielded F/UTP jobs, we’re also configuring the bonding path to the telecom grounding busbar so the shield reduces interference instead of adding it. All work follows ANSI/TIA-568.2-D and TIA-569 standards, and our crews work under a California C-7 state license.
Cat6A Cable Specifications
These are the specifications we design and test to on every Cat6A cabling infrastructure project in San Francisco. Exact numbers depend on the manufacturer, so we confirm them against the data sheet during design.
| Specification | Cat6A U/UTP (unshielded) | Cat6A F/UTP (shielded) |
|---|---|---|
| Bandwidth | 500 MHz | 500 MHz |
| Max speed | 10GBASE-T (also 2.5G/5G NBASE-T) | 10GBASE-T (also 2.5G/5G NBASE-T) |
| Max channel length | 100 m (90 m permanent link + 10 m cords) | 100 m (90 m permanent link + 10 m cords) |
| Conductor size | Typically 23 AWG | Typically 23 AWG |
| Typical outside diameter | About 0.25–0.30 in | About 0.27–0.32 in |
| PoE support | IEEE 802.3bt Type 4, up to 90 W at the switch | IEEE 802.3bt Type 4, up to 90 W at the switch |
| Interference protection | Pair geometry and separator | Overall foil shield, bonded to ground |
| Best for | Offices, Wi-Fi 7 APs, schools | Labs, imaging rooms, industrial floors |
Cat6A or Cat6?
Choose Cat6A when a link needs 10 Gbps beyond 55 meters, feeds a Wi-Fi 6E or Wi-Fi 7 AP, or carries high-wattage PoE. For desk phones and standard workstations on a tighter budget, Cat6 data cabling is often the better value, and many structured cabling projects mix the two.
Cat6A Installations Across the City
Recent Cat6A cabling work for business tenants across San Francisco CA:
Mission Bay life science labs
Shielded F/UTP Cat6A cabling for biotech labs near UCSF Mission Bay, routed away from centrifuges, freezers and imaging equipment that introduce electrical noise.
East Cut high-rise offices
Dual Cat6A drops to every Wi-Fi 7 AP on full floors in the towers around Salesforce Park, feeding 5 Gbps and 10 Gbps switch ports.
SoMa video and design studios
10 Gbps Cat6A cabling to editing bays and NAS storage for media teams moving large 4K and 8K files across the network.
Van Ness medical offices
Cat6A cabling to exam rooms and imaging suites along the Van Ness corridor, giving PACS imaging data headroom and powering wall-mounted PoE devices.
Cat6A Testing & Certification
Every Cat6A cabling installation is certified to TIA-568.2-D Category 6A permanent link limits, measuring wire map, length, insertion loss, NEXT, PSNEXT and return loss across the full 500 MHz range. For large PoE bundles or shielded installs, we also sample-test alien crosstalk and verify shield continuity end to end.
You receive exported PDF documentation for every link, organized by telecom room and panel, so your IT team has a record of the cabling infrastructure for future moves and audits. See how our network cabling testing and certification works.
Cat6A Cabling Installation FAQs
How far can Cat6A run at 10 Gbps?
Cat6A cabling supports 10GBASE-T across a full 100-meter channel: up to 90 meters of installed cable plus 10 meters of patch cords. Cat6 only reaches 10 Gbps to about 55 meters.
Do I need shielded Cat6A?
Most San Francisco offices don’t. Unshielded U/UTP Cat6A cabling handles 10 Gbps and alien crosstalk on its own. Shielded F/UTP makes sense near heavy electrical noise, such as lab equipment, medical imaging or industrial machinery, and it must be properly bonded to ground to work.
Is Cat6A worth it over Cat6?
For APs, high-wattage PoE devices and any building you plan to occupy for years, yes. Wi-Fi 7 uses 5 Gbps and 10 Gbps uplinks, and Cat6A runs cooler in large PoE bundles, which future-proofs your network wiring. For desk phones and basic workstations, Cat6 is often enough.
Can you replace our old Cat5e with Cat6A?
Yes. We remove the old cables, check that pathways can take the larger diameter of Cat6A cabling, install and terminate the new runs, and certify every link before cutting over to your switches and network systems.
Do you install fiber along with Cat6A?
Yes. Most structured cabling projects pair Cat6A horizontal cabling with a single-mode or multimode fiber backbone between the MDF and IDFs. We install both, along with racks, patch panels and cable management systems, as part of one low voltage cabling scope for your data network.
Do you offer other cabling services?
Beyond Cat6A, our cabling services include data cabling, fiber optic backbones, Wi-Fi, VoIP, security camera and AV wiring systems, all built on the same structured cabling standards.
Cat6A Cabling Service Area
We provide Cat6A installation services in every San Francisco neighborhood, plus these nearby cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Cat6A Cabling Quote
Send a floor plan, drop count or AP layout, and we’ll schedule a San Francisco site walk and return an itemized quote for the services you need, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get Cat6A cabling installed, terminated and certified for 10 Gbps in San Francisco CA.
Request a quote