Network Cabling Installation in San Francisco CA – New Drops, Moves & Upgrades
We install new network cabling in San Francisco CA for offices, warehouses, schools, clinics and retail spaces: Cat6 and Cat6A drops pulled from your telecom room to every desk, access point and camera, terminated, labeled and certified before we leave.
From a single added drop to a 600-run tenant buildout, our C-7 licensed crews handle the full installation: pathways, cable pulls, terminations, rack work and testing, scheduled around your business hours.
Need new drops or a full office wired? Get an itemized installation quote — call (628) 215-7235.
Request a quotePart of our network cabling services.
Network Cabling Installation Services
Pick the installation service that fits your project. Each one is installed by our own technicians and certified on completion.
-
Copper data drops for workstations, printers, phones and AV equipment.
-
Ethernet runs for 1G to 10GBASE-T networks and PoE devices.
-
Cost-effective 250 MHz drops for gigabit desks and phones.
-
10 Gbps to 100 m for Wi-Fi 6E/7 access points and PoE++.
-
Network Cabling Testing & Certification
TIA-568.2-D permanent link reports for every installed run.
Commercial Cabling Projects We Handle
Most of our installation work falls into one of four project types. Each is scoped differently, so we price them differently too.
New construction and buildouts
Complete horizontal cabling for a new office or tenant floor, coordinated with your general contractor so cable is pulled before ceilings close.
Moves, adds and changes
Adding drops for new hires, relocating desks or reconfiguring a room without disrupting the cabling that’s already working.
Cat5e to Cat6A upgrades
Replacing aging cable so new Wi-Fi 7 access points and multi-gig switches get the bandwidth and PoE they need.
Cleanup and abandoned cable removal
Tracing and removing dead cable from ceilings, as the California Electrical Code requires, then re-dressing what stays.
From Site Survey to Termination: How We Install
Every project begins with a site survey. We walk the space with your floor plan, locate the MDF and IDF rooms, measure routes to confirm every link stays under 90 m, and note ceiling types, firewalls and any areas that need after-hours access.
Next come the pathways. J-hooks are mounted every four to five feet along the route, with sleeves and firestopping where cable passes through rated walls. Supporting cable properly keeps it from sagging onto ceiling tiles and protects its performance over time.
Cable is then pulled in bundles from the IDF, with pull tension kept under 25 pounds and bend radius at four times the cable diameter. We leave a service loop at both ends so future moves don’t require a new run.
Finally, we’re terminating each cable to a T568B keystone jack at the outlet and punching it down on a patch panel in the rack. Both ends are labeled to TIA-606, and the run is tested and certified before it’s connected to your switch.
Network Cable Installation Standards We Follow
| Installation factor | Requirement | Standard | Why it matters |
|---|---|---|---|
| Permanent link length | 90 m maximum | TIA-568.2-D | Leaves 10 m for patch cords in a 100 m channel |
| Bend radius | 4× cable diameter (installed) | TIA-568.2-D | Tight bends degrade crosstalk and return loss |
| Pull tension | 25 lbf maximum | TIA-568.2-D | Overpulling stretches pairs and fails certification |
| Support spacing | J-hooks every 4–5 ft | TIA-569-E | Prevents sag and stress on the cable |
| Untwist at termination | 0.5 in maximum | TIA-568.2-D | Keeps pair twist intact for Cat6/Cat6A performance |
| Labeling | Both ends, unique ID | TIA-606-C | Every drop traceable from faceplate to panel |
Where We Install Network Cabling
- Office workstations and desks
- Conference rooms and floor boxes
- Ceiling access point locations
- Exterior and interior camera points
- Warehouse racks and scanners
- Classrooms and labs
- Exam rooms and nurse stations
- Retail POS counters
- Telecom rooms and IDFs
Recent installation work by neighborhood
Presidio office conversions
Installing Cat6A in converted historic Army buildings, routing cable to avoid altering protected walls and trim.
Bayview warehouses
Long runs to scanners, cameras and access points in distribution warehouses, with IDFs placed to keep every link under 90 m.
Mission District coworking
Moves, adds and changes for coworking floors on Valencia and Mission, where member turnover means frequent reconfigurations.
Hayes Valley storefronts
Compact retail installs for POS, cameras and guest Wi-Fi in narrow storefronts with limited ceiling space.
Network Cabling Service Area
We install network cabling across the city and in these nearby cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Quote From a Licensed Cabling Installer
Send a floor plan or drop count, and we’ll schedule a site walk and return an itemized quote, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get your new drops installed, labeled and certified on schedule.
Request a quote