Ethernet Cabling Installation in San Francisco CA – #1 C7 Licensed Contractor

Ethernet Cabling Installation in San Francisco CA – Cat6, Cat6A & PoE

We install Ethernet cabling in San Francisco CA for offices, schools, retail stores and medical facilities: new Cat6 and Cat6A drops, Power over Ethernet runs for access points, cameras and phones, and multi-gig upgrades, each one terminated, labeled and certified.

Our technicians run every cable from your switch to the device, so a new conference room, a row of security cameras or a building full of Wi-Fi 7 access points is connected, powered and working the day we finish.

Need new Ethernet drops or PoE for cameras and access points? Call (628) 215-7235 for an itemized quote.

Request a quote

Professional Cabling for Ethernet Networks

New Ethernet drops

Single drops or hundreds at a time, pulled from the IDF to desks, conference tables, printers and AV equipment, then terminated to keystone jacks and patch panels.

Power over Ethernet runs

One cable for data and power to wireless access points, IP cameras, VoIP phones, door readers and digital signage, with no outlet needed at the device.

Multi-gig Ethernet upgrades

Replacing Cat5e with Cat6A so 2.5G, 5G and 10GBASE-T switches and Wi-Fi 7 access points can run at their full rated speed.

Moves, adds and changes

Relocating drops after a desk reshuffle, adding ports to a crowded room, or extending a run when your floor plan changes.

Ethernet troubleshooting and repair

Tracing dead jacks, slow links and intermittent drops to a bad termination, damaged cable or crossed pair, then fixing and retesting the run.

Abandoned cable removal

Pulling out old, unused Ethernet cable from ceilings and risers, as the California Electrical Code requires, to free up pathways and cut fire load.

How We Install and Connect Ethernet Runs

Before pulling any cable, we confirm the route stays inside the 100-meter Ethernet channel limit: 90 meters of permanent link from patch panel to wall jack, plus up to 10 meters of patch cords at both ends. Runs that would go longer get a fiber uplink to a closer IDF instead.

Most San Francisco high-rises use the space above the drop ceiling as an air-return plenum, so we install plenum-rated (CMP) Ethernet cable there and riser-rated (CMR) cable in vertical shafts. Cable is supported on J-hooks every four to five feet, kept away from lighting ballasts and electrical feeders, and never zip-tied tight enough to deform the jacket.

We terminate both ends to T568B, mount jacks in faceplates, surface boxes or floor boxes, and punch down the rack end on a patch panel. Each port is labeled to TIA-606 so the number on the wall matches the number on the panel and in your documentation.

For PoE, we keep bundles small and use Cat6A where devices draw 60 to 90 watts, because larger conductors and better heat dissipation keep the cable inside its temperature rating in long bundled runs.

Plenum-rated Cat6A Ethernet cable supported on J-hooks above a drop ceiling
Plenum-rated (CMP) Cat6A Ethernet cable on J-hooks spaced 4–5 ft apart above a drop ceiling, with bundles kept to 24 cables or fewer for PoE heat management.

Devices We Wire for Ethernet Connectivity

  • Desktop workstations and docks
  • Wireless access points
  • IP security cameras
  • VoIP desk and conference phones
  • Access control readers and controllers
  • Printers and copiers
  • Video conferencing codecs and displays
  • Digital signage players
  • POS terminals and kiosks
  • Building automation controllers
  • Medical carts and workstations on wheels
  • Network switches and servers

Ethernet Speeds, Cable Categories and PoE Power

The speed your Ethernet network can reach depends on both the switch and the cable behind the wall. This table shows which cable each Ethernet standard needs at full distance.

Ethernet standards and the minimum cable category for each
Ethernet standard IEEE spec Speed Minimum cable for 100 m Typical devices
1000BASE-T802.3ab1 GbpsCat5eWorkstations, printers, phones
2.5GBASE-T802.3bz2.5 GbpsCat5e (Cat6 recommended)Wi-Fi 6 access points
5GBASE-T802.3bz5 GbpsCat6Wi-Fi 6E and Wi-Fi 7 access points
10GBASE-T802.3an10 GbpsCat6A (Cat6 to 55 m only)Uplinks, servers, high-end APs
Power over Ethernet types and power levels
PoE type IEEE spec Power at switch Power at device Typical devices
PoE (Type 1)802.3af15.4 W12.95 WVoIP phones, fixed cameras
PoE+ (Type 2)802.3at30 W25.5 WWi-Fi 6 APs, door readers
PoE++ (Type 3)802.3bt60 W51 WWi-Fi 7 APs, PTZ cameras
PoE++ (Type 4)802.3bt90 W71.3 WDisplays, heated outdoor cameras

Ethernet Projects Across the City

Presidio offices in historic buildings

Ethernet runs for tenants in converted Army barracks and brick buildings around the Main Post, routed through surface raceway to protect historic plaster and trim.

SoMa coworking floors

Hundreds of desk drops and PoE runs for ceiling access points in shared offices, installed in phases so members keep working.

Mission District schools

Classroom Ethernet drops, PoE for wireless access points and cameras, and new IDF patch panels, all installed over summer and winter breaks.

Union Street and Hayes Valley boutiques

Compact Ethernet installs for POS terminals, a back-office PC, a guest access point and a few PoE cameras, often finished in a single day.

Ethernet Testing & Certification

Every Ethernet run we install is certified, not just checked for link lights. The tester measures wire map, length, insertion loss, NEXT and return loss on all four pairs against TIA-568.2-D limits for the cable category, and you receive the exported reports at closeout. See how we test and certify network cabling.

Cable certification tester showing a passing Cat6 Ethernet permanent link result
Passing Cat6 permanent link at 62 m: correct T568B wire map on all four pairs and 4.1 dB worst-case NEXT margin, rated for 1000BASE-T through 5GBASE-T.

Ethernet Installation Service Area

We install Ethernet cabling in every neighborhood in the city, plus these nearby cities:

See every location on our service area page.

Request an Ethernet Installation Quote

Tell us how many drops you need and where, or send a floor plan, and we’ll return an itemized quote, usually within two business days.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get your Ethernet cabling installed, powered and certified on schedule.

Request a quote

Send us your project details