Structured Cabling in San Francisco CA – #1 C7 Licensed Contractor

Structured Cabling in San Francisco CA

We design, install, terminate and certify structured cabling systems for commercial buildings, from the entrance facility and MDF to every IDF, horizontal run and work-area outlet.

Need structured cabling in San Francisco CA? Our C-7 licensed low voltage crews build out telecom rooms, pull Cat6A horizontal cabling, run fiber backbones between floors, and label every port so your IT team can trace any drop in seconds. One contractor handles the whole system, so there’s no finger-pointing between the cabling, rack and fiber trades.

Building out, moving or cleaning up a telecom room? Get a site walk and itemized quote. Call (628) 215-7235.

Request a quote

Structured Cabling Services

Choose from the cabling services below to fit your project. Most buildouts combine two or more, such as a tenant improvement paired with a new MDF and IDF build-out.

What a Structured Cabling System Includes

A structured cabling system replaces point-to-point wiring with a standardized, documented layout. Instead of running cable wherever it’s needed, we install a hierarchy: the carrier’s lines enter the building at the entrance facility, connect to core switching in the main distribution frame (MDF), travel up the riser on fiber backbone to an intermediate distribution frame (IDF) on each floor, and fan out as horizontal copper to desks, access points and cameras, with voice cabling for desk phones running on the same Cat6A plant.

Because every link follows the same standards and a documented cabling design, adding a workstation means patching a port rather than pulling new cable. Moves and changes take minutes, troubleshooting starts with a label instead of a guess, and the system supports network upgrades for 15 years or more.

We coordinate with electrical contractors on dedicated power and grounding for each telecom room, and keep low voltage pathways separated from electrical circuits as the code requires.

The six subsystems of a TIA-568 structured cabling system and what we install in each
SubsystemWhat we installTypical mediaGoverning standard
Entrance facilityCarrier demarc extension, surge protection, entrance conduitOS2 fiber, Cat6TIA-568.0-E, NEC Article 800
Equipment room (MDF)Racks, cabinets, ladder rack, core patching, grounding busbarOS2 / OM4 fiber, Cat6ATIA-569-E, TIA-607-D
Backbone cablingRiser fiber and copper between MDF and each IDFOM4 multimode, OS2 single-modeTIA-568.3-D
Telecommunications room (IDF)Wall or floor racks, patch panels, horizontal cable managersCat6A patch panels, LC fiber enclosuresTIA-569-E
Horizontal cablingRuns from IDF to each outlet, max 90 m permanent linkCat6 or Cat6A, plenum-rated (CMP)TIA-568.2-D
Work areaFaceplates, jacks, floor boxes, AP and camera dropsCat6A keystone jacks, patch cordsTIA-568.0-E, TIA-606-C
IDF telecom room with network racks, overhead ladder rack and labeled Cat6A patch panels
An IDF built out with two 45U racks on seismic bases, 12-inch overhead ladder rack, and a TIA-607 grounding busbar bonded to building steel. Each 48-port Cat6A patch panel is labeled to TIA-606 with floor, room, rack and port.

Buildings and spaces we cable

  • Multi-tenant office towers
  • Single-tenant headquarters
  • Life science and lab buildings
  • Warehouses and distribution centers
  • Medical offices and clinics
  • Schools and campuses
  • Retail and hospitality
  • Historic and masonry buildings

Structured Cabling Projects Across the City

Financial District high-rise TIs

Full-floor tenant improvements on Montgomery and Market Street, tying new IDFs into the building’s shared riser and scheduling cable pulls around freight elevator reservations.

Jackson Square historic offices

Brick and timber buildings where open ceilings and seismic retrofits call for surface raceway, exposed ladder rack and careful routing around new steel bracing.

Mission Bay lab buildings

Plenum-rated horizontal cabling and separate IDFs for lab instruments and corporate IT in life science suites, built to the landlord’s base-building standards.

SoMa and Dogpatch warehouse conversions

Open-plan offices in converted industrial space, where cable tray runs overhead and floor boxes feed workstations in the middle of the room.

How We Install Structured Cabling

  1. Survey and design

    We walk the space, measure cable paths and confirm the 90 m horizontal limit for every outlet, then place the MDF and IDFs to keep runs short.

  2. Itemized proposal

    You get drop counts, rack elevations, a backbone diagram and a line-item price before any work starts.

  3. Telecom room build-out

    Racks, ladder rack, grounding and power go in first, so cable has a finished destination.

  4. Network cabling and ethernet cable pulls

    Each ethernet cable and backbone fiber strand is pulled, dressed, terminated and labeled floor by floor.

  5. Certification and handoff

    Every link is tested, and you receive as-built drawings, a port map and certification reports.

Structured Cabling Testing & Documentation

Each copper permanent link is certified against TIA-568.2-D limits for insertion loss, NEXT, return loss and length. Backbone fiber gets Tier 1 loss testing and Tier 2 OTDR traces. Results come straight from the tester as PDF reports, organized by telecom room and patch panel, and qualify the installation for manufacturer system warranties of up to 25 years. Every cable installation is reviewed by a lead technician before handoff.

Cable certification report summary showing passing Cat6A permanent links
Certification summary for a 288-drop floor: every Cat6A permanent link passed TIA-568.2-D, with a worst-case NEXT margin of 4.1 dB and the longest link at 82 m, under the 90 m limit.

Structured Cabling Service Area

We provide cabling services in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:

See every location on our service area page.

Request a Structured Cabling Quote

Send a floor plan, drop count or a description of the space, and we’ll schedule a site walk and return an itemized quote, usually within two business days. We carry general liability and workers’ compensation insurance, and we scale our low voltage cabling solutions from a single suite to an entire building.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]

Get a structured cabling system that’s installed, labeled and certified on schedule.

Request a quote

Send us your project details