Fiber Termination in San Francisco CA
We terminate single-mode and multimode fiber with LC, SC and MTP/MPO connectors, using fusion-spliced pigtails, splice-on connectors and pre-terminated trunks, then mount every strand in a labeled enclosure ready to patch.
Need fiber termination in San Francisco CA? Our C-7 licensed technicians splice, connect and dress every strand, inspect and clean each end face before it’s mated, and test the finished link so your backbone comes up clean the first time. We also re-terminate damaged connectors and untangle panels left behind by previous tenants.
New backbone to terminate, or a damaged connector to fix? Get a site walk and itemized quote. Call (628) 215-7235.
Request a quoteTermination Services We Provide
The right termination method depends on strand count, fiber type, space in the rack and how much loss the link can afford. We pick the method for each job instead of using one approach everywhere.
-
Fusion-spliced pigtails
Factory-polished LC or SC pigtails fusion-spliced onto each strand inside the enclosure. It’s the lowest-loss method and our default for backbones.
-
Splice-on and field connectors
Splice-on connectors for single strands and repairs where a full pigtail tray won’t fit, with a factory end face and a fusion splice behind it.
-
MTP/MPO trunks and cassettes
Pre-terminated 12- and 24-fiber trunks plugged into cassettes or adapter panels for high-density server rooms and 40/100G links.
-
Enclosures and adapter panels
Rack-mount enclosures from 1U to 4U and wall-mount boxes for smaller closets, loaded with adapter panels and labeled strand by strand.
-
End-face inspection and cleaning
Every connector is scoped and cleaned before it’s mated, because a single speck of dust on a 9 µm core can fail a link.
-
Re-termination and repair
Damaged connectors, crushed pigtails and mislabeled panels fixed and re-terminated, often during TI work or after other trades disturb a rack.
Connector Types & Loss Specifications
Every connector adds a little loss to a link, and every link has a budget. Industry standard TIA-568.3-D allows up to 0.75 dB per mated connector pair, but a well-terminated pair typically measures around 0.3 dB or less, which leaves headroom for future patching. Single-mode links can also use angled (APC) polish, which reflects far less light back toward the transmitter than flat (UPC) polish.
| Connector | Fibers | Typical use | Polish options | Typical mated loss |
|---|---|---|---|---|
| LC duplex | 2 | Switch ports, patch panels, most new installs | UPC (blue/beige), APC (green) | 0.1–0.3 dB |
| SC | 1 | Carrier handoffs, older panels, PON equipment | UPC, APC | 0.1–0.3 dB |
| ST | 1 | Legacy multimode in older buildings | UPC | 0.2–0.5 dB |
| MTP / MPO | 12 or 24 | Server rooms, 40G and 100G parallel optics | UPC (multimode), APC (single-mode) | 0.2–0.5 dB |
Where we terminate strands
- MDF and IDF racks
- Server rooms and data closets
- Building entrance facilities
- Wall-mount closet enclosures
- Carrier demarc extensions
- Lab and clinical networks
- Warehouse network enclosures
- Campus building entrances
Termination Projects Across the City
Financial District re-termination
Cleaning up IDF panels in Montgomery Street towers after tenant improvements, replacing crushed pigtails and relabeling strands nobody could trace.
SoMa server rooms
MTP/MPO trunks and LC cassettes for 40 and 100 Gbps uplinks between racks, with polarity checked on every trunk.
Mission Bay lab entrances
Single-mode campus fiber terminated with APC connectors at each lab building entrance, ready for carrier and inter-building links.
Bayview warehouse enclosures
Wall-mount enclosures terminating fiber that runs the length of large distribution buildings to remote network closets.
How We Terminate Each Strand
Site survey and panel plan
We confirm strand count, fiber type, connector style and polish, and lay out the enclosure and adapter panels with a strand map.
Prepare the cable
The jacket and buffer are stripped to length, strands are cleaned and cleaved, and the cable is secured to the enclosure’s strain relief.
Splicing and connector installation
Pigtails are fusion-spliced and stored in trays, or connectors and trunks are installed, with bend radius protected throughout.
Inspect and clean
Every end face is scoped and cleaned to IEC 61300-3-35 before it’s plugged into an adapter.
Test and label
Each strand is loss-tested and traced, and the enclosure is labeled to match the strand map and test report.
Related Fiber Optic Services
Termination is one stage of every fiber link. See our main fiber optic cabling page for the full overview.
- Fiber Optic Installation: Backbone, riser and outside plant fiber pulled and routed before termination.
- Fiber Optic Splicing: Fusion splicing for pigtails, building entrances and cable repairs.
- OTDR Testing & Certification: Tier 1 loss testing and Tier 2 OTDR traces for every terminated strand.
Termination Service Area
We terminate fiber in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request a Termination Quote
Tell us the strand count, fiber type and connector you need, or send a photo of the panel, and we’ll schedule a site walk and return an itemized quote, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get every strand terminated, inspected and labeled right the first time.
Request a quote