Security Infrastructure in San Francisco CA
We build the cabling, cameras and door hardware behind your building’s physical security: PoE camera drops, IP camera mounting and NVR setup, and wiring for every badge reader, lock and door contact.
Need security infrastructure in San Francisco CA? Our C-7 licensed technicians start with security planning, mark camera coverage and badge-entry doors with you, run certified Cat6 and reader cable from your IDF to every device, mount and aim the cameras, and wire readers and locks so your integrator or in-house team can bring everything online without chasing cabling problems.
Adding cameras, badge readers or upgrading old equipment? Get a walkthrough and itemized quote. Call (628) 215-7235.
Request a quoteSecurity Services We Provide
Cameras and door security share the same backbone: network cabling, PoE switches and a telecom room to bring it all together. We offer local security services for each layer on its own or as one package.
-
Security Camera Cabling
Home-run Cat6 and Cat6A to every camera location, with PoE power, outdoor-rated cable and conduit where runs leave the building.
View security camera cabling -
Security Camera Installation
IP cameras mounted, aimed and connected to your NVR or cloud platform, with surveillance coverage planned for entrances, aisles, lots and registers.
View security camera installation -
Access Control Wiring
Card readers, door controllers, electric locks, door contacts and request-to-exit devices wired to every badge-entry door.
View door hardware wiring
How Cameras and Badge Entry Fit Together
Modern security runs on your network. Every IP camera gets a Cat6 drop that carries both footage and PoE power back to a switch, and recordings land on an NVR in the telecom room or a cloud platform. Badge entry works alongside it: each door has a reader, a lock, a door contact and a request-to-exit device, all wired to a door controller that decides who gets in and logs every swipe.
When both are designed together, they reinforce each other. A camera covers every badge-entry door, an alarm on a forced-open door can pull up that camera’s view, and badge records line up with recorded footage when you need to review an incident. We keep camera and door equipment on its own network segment for cyber security, and plan devices and cable paths as one design so nothing gets missed or cabled twice.
| Device | Cabling we install | Power | Connects to | Notes |
|---|---|---|---|---|
| Fixed IP camera | Cat6, one drop per camera | 802.3af PoE | PoE switch, NVR or cloud platform | Indoor and outdoor models |
| PTZ or outdoor heated camera | Cat6 or Cat6A, in conduit outdoors | 802.3at or 802.3bt PoE | PoE switch, NVR | Heaters and motors draw more power |
| Card reader | Shielded twisted pair (Wiegand or OSDP) | From door controller | Door controller | OSDP adds encryption and supervision |
| Electric strike or mag lock | 18 AWG lock power cable | Lock power supply | Door controller, fire alarm release | Fail-safe or fail-secure per code |
| Door contact and REX | 22 AWG cable | None | Door controller | Detects forced and propped doors |
| IP door controller | Cat6 | 802.3at PoE or panel supply | Badge server or cloud | Often one per door or per floor |
Facilities we secure
- Corporate offices
- Multi-tenant office buildings
- Retail stores
- Warehouses and distribution centers
- Life science and lab buildings
- Medical offices and clinics
- Schools and campuses
- Parking garages and lots
Security Projects Across the City
Dense urban buildings bring their own challenges: shared lobbies, older structures with little ceiling space, and California code rules for locks on exit doors. These are typical projects we handle.
Union Square retail
Camera coverage over registers, entrances and stockrooms for flagship stores, with high-resolution views for loss prevention.
Mission Bay labs
Badge readers on lab suites and restricted rooms, with cameras on every badge-entry door to meet tenant and compliance requirements.
Bayview warehouses
Outdoor PTZ and fixed cameras over yards and loading docks, with cable run in conduit and powered by high-wattage PoE.
Financial District office floors
Card readers at suite entries and server rooms, tied into the building’s lobby readers so tenants use one badge.
Our Security Installation Process
Walkthrough and risk review
We walk the property, note weak points in a quick vulnerability assessment, mark camera views and badge doors on your floor plan, and confirm switch, PoE and NVR capacity.
Coordinate with your integrator
We work with your security providers or IT team on camera models, controllers and software, or recommend equipment if you need it.
Cabling and hardware
Cat6 and reader cable are run and labeled, and locks, contacts, REX devices and power supplies are installed.
Mount and connect
Cameras are mounted and aimed, readers and controllers wired, and every device patched to its switch port.
Test and hand off
We certify every cable, test every camera view and door, and hand over a device map and test reports.
Camera & Badge Entry Service Area
We install cameras and badge entry in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Start Your Security Planning
Send a floor plan, the number of cameras and doors you need, or photos of your current setup, and we’ll schedule a walkthrough and return an itemized quote, usually within two business days. Unlike many security companies, we handle the cabling and the devices with our own crews.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get security solutions that are cabled, installed and working together.
Request a quote