Access Control Wiring in San Francisco CA
We wire every piece of a controlled door: the card reader, the electric lock, the door contact, the request-to-exit device and the controller that ties them together, all labeled, tested and ready for your security integrator.
Need access control wiring in San Francisco CA? Our C-7 licensed technicians run reader and lock cable from each door to its controller, install strikes, mag locks, contacts and REX devices, size lock power so doors work reliably, and tie magnetic locks into the fire alarm. Your integrator can then program credentials on day one instead of troubleshooting wiring.
Adding badge readers or replacing keys with card access? Get a walkthrough and itemized quote. Call (628) 215-7235.
Request a quoteWhat We Wire at Every Controlled Door
A controlled door is more than a card reader. Each one needs four or five devices wired back to a controller, and every one of them has to work for the door to be secure and code compliant.
-
Card reader wiring
Shielded cable from every reader to its door controller, run for Wiegand or the newer, encrypted OSDP protocol, with a service loop at the frame.
-
Electric strikes and mag locks
Lock power wiring for electric strikes, magnetic locks and electrified hardware, sized so voltage stays in spec at the door.
-
Door contacts and REX devices
Door position switches that report forced and propped doors, and request-to-exit sensors or push buttons for free egress.
-
Door controllers and panels
IP door controllers and multi-door panels mounted in the IDF or above the ceiling, powered by PoE or a dedicated supply.
-
Power supplies and battery backup
Lock power supplies with battery backup so doors behave predictably during a power outage, set fail-safe or fail-secure per door.
-
Fire alarm release
Magnetic locks and electrified egress doors tied into the fire alarm so they release automatically in an emergency, as code requires.
Door Wiring and Access Cabling Requirements
These are the cable types we typically run for each component. Exact conductor counts and gauges depend on the reader, lock and controller models, so we confirm them against the manufacturer’s wiring diagrams during design.
| Door component | Typical cable | Connects to | Notes |
|---|---|---|---|
| Card reader (Wiegand) | 22 AWG, 6-conductor shielded | Door controller | Common on older and budget systems |
| Card reader (OSDP) | 22 AWG shielded twisted pair plus power pair | Door controller (RS-485) | Encrypted, supervised, supports longer runs |
| Electric strike or mag lock | 18 AWG, 2-conductor (16 AWG on long runs) | Lock power supply via controller relay | Sized for voltage drop at the door |
| Door position switch | 22 AWG, 2-conductor | Door controller input | Reports forced and held-open doors |
| Request-to-exit (REX) | 22 AWG, 4-conductor | Door controller input and lock circuit | Motion sensor or push button |
| Composite access cable | Reader, lock, contact and REX in one plenum jacket | Door controller | One pull per door, faster and neater |
| IP door controller | Cat6 | Network switch, access server or cloud | Often powered by 802.3at PoE |
How we wire each door into your structured cabling
Every door gets a home run from the frame to its controller, usually in composite plenum cable so one pull carries the reader, lock, contact and REX conductors. We leave a service loop above the door, use power transfer hinges or door loops for locks mounted in the door leaf, and run surface raceway on glass storefronts where there’s no wall to hide cable in. Lock power is calculated for every run so a 12 or 24 VDC lock still gets the voltage it needs at the end of a long cable. Each mag lock is set fail-safe, paired with a motion REX and a push-to-exit button, and wired to release on fire alarm, as the California Building Code requires.
Access Control Projects Across San Francisco
Mission Bay lab suites
Readers and electric locks on labs, freezer rooms and restricted areas, with door contacts that log every opening for compliance.
Financial District offices
Suite entries and server rooms wired to work with the building’s lobby system, so tenants carry one badge.
Union Square retail
Card access on stockrooms, cash offices and staff entrances, wired neatly through tight storefront framing.
SoMa coworking spaces
Mobile-credential readers on front doors and private offices, with IP controllers managed from the cloud.
Our Access Control Wiring Process
Door survey
We check each door’s frame, hardware, swing and egress needs, and mark controller and power supply locations.
Design with your integrator
We confirm reader, lock and controller models with your security integrator, then plan cable types and lock power.
Rough-in
Composite or individual cables are home-run from each door to the controller and labeled at both ends.
Trim-out and device installation
Readers, locks, contacts and REX devices are mounted and terminated, and power supplies and controllers installed.
Door-by-door testing
We test every read, unlock, forced-door and held-open alarm, REX release, fire alarm release and battery backup.
Related Security Services
Door wiring is one part of a complete security setup. See our main security infrastructure page for the full overview, or our intercom page for visitor entry at the same doors.
- Security Camera Cabling: PoE camera drops so every controlled door is also on camera.
- Security Camera Installation: Cameras mounted, aimed and connected to your NVR or cloud platform.
Access Control Wiring Service Area
We wire controlled doors in every neighborhood of the city, plus these Peninsula, East Bay and Marin cities:
- Daly City, CA
- Tiburon, CA
- Alameda, CA
- Oakland, CA
- South San Francisco, CA
- San Bruno, CA
- Albany, CA
- Berkeley, CA
- Piedmont, CA
- Mill Valley, CA
See every location on our service area page.
Request an Access Control Wiring Quote
Tell us how many doors you want to control, the type of doors and whether you already have a reader brand in mind, and we’ll schedule a walkthrough and return an itemized quote, usually within two business days.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get every controlled door wired, tested and ready for credentials.
Request a quote