What Are Telecommunication Devices? | SF Telecom Techs

Home / Blogs / Telecommunication Devices

What Are Telecommunication Devices?

Short answer: Telecommunication devices are any equipment that sends, receives, routes, switches or carries information over a distance using electrical, optical or radio signals. Telephones, smartphones, computers, modems, routers, network switches, Wi-Fi access points, fiber optic transceivers and business phone systems are all telecommunication devices.

The easiest way to understand them is by the job they do: some are used by people (end-user devices), some direct traffic (network devices), some move the signal (transmission devices), and some live in the telecom room and hold everything together.

Every phone call, email, video meeting and security camera feed passes through a chain of devices. At one end, a device turns your voice, video or data into a signal. In the middle, other devices carry and direct that signal. At the far end, another device turns the signal back into something a person can hear, see or use.

If you are new to the subject, start with what telecommunication is. If you manage an office, school, warehouse or medical building, this guide will help you recognize the equipment on your walls, ceilings and racks, and understand what each piece needs from your cabling.

How Telecommunication Devices Work Together

Every telecommunication system has the same basic parts: a sender, a channel and a receiver. Devices fill each of those roles.

  1. A sending device (a phone, laptop or camera) converts information into an electrical, light or radio signal.
  2. Transmission devices and media (cables, transceivers, antennas) carry that signal from place to place.
  3. Network devices (switches, routers, gateways) direct the signal so it reaches the right destination.
  4. A receiving device converts the signal back into sound, video or data.

Most devices in a modern building do more than one of these jobs. A VoIP desk phone sends and receives. A Wi-Fi access point both transmits radio signals and acts as a small network device. You can read more about this flow in how telecommunication works and the main components of a telecommunication system.

1. End-User Devices

Used directly by people

End-user devices, sometimes called terminal equipment, are the ones people pick up, look at or talk into. They sit at the edge of the network and turn human communication into signals and back again.

  • Telephones and VoIP handsets. Traditional analog phones send voice over copper phone lines. VoIP phones turn voice into data packets and send them over the same Ethernet network as your computers.
  • Smartphones and tablets. These connect over cellular networks and Wi-Fi and combine voice, messaging, video and data in one device.
  • Computers and laptops. A computer becomes a telecommunication device whenever it sends email, joins a video call or loads a web page. Its network adapter, wired or wireless, does the actual communicating.
  • Video conferencing devices. Room cameras, speakerphones and conferencing bars that send and receive live audio and video.
  • Two-way radios and pagers. Still common in warehouses, hospitals, hotels and job sites where staff need instant push-to-talk communication.
  • Fax machines and multifunction printers. Older, but still in use in medical and legal offices that send documents over phone lines or the network.

2. Network Devices

Direct the traffic

Network devices decide where information goes. They connect end-user devices to each other, to the rest of the building and to the internet.

Modem
Short for modulator-demodulator. It converts the signal from your internet service provider, whether that arrives over coax, copper phone lines or fiber, into data your network can use. On fiber service, this job is done by an optical network terminal (ONT).
Router
Directs data between your internal network and the internet, and between separate networks inside your organization. Most business routers also handle security and traffic rules.
Network switch
Connects the wired devices inside your building so they can talk to each other. A switch is where every Ethernet cable from desks, phones, cameras and access points ends up. PoE switches also send power over those same cables.
Wireless access point
Turns a wired network connection into Wi-Fi so laptops and phones can connect without a cable. Access points are mounted on ceilings or walls and almost always fed by an Ethernet cable from the switch.
Firewall and gateway
A firewall filters traffic coming into and out of the network. A gateway connects two different kinds of systems, such as a VoIP gateway that links internet phone service to older analog phones or fax lines.

Small offices often have a single box that acts as modem, router, firewall and Wi-Fi. Larger buildings split those jobs across separate devices so each one can be sized, secured and replaced independently.

3. Transmission Devices and Media

Carry the signal

Transmission devices are what physically move a signal from one point to another. They are easy to overlook because many are hidden in ceilings, walls and racks, but every other device depends on them.

  • Copper cable. Twisted-pair Ethernet cable such as Cat6 and Cat6A carries data, and often power, to devices up to 100 meters (about 328 feet) from the switch. Coaxial cable is still used for cable TV and some internet service.
  • Fiber optic cable. Strands of glass that carry data as pulses of light. Fiber links telecom rooms, floors and buildings, and is immune to electrical interference. See our page on fiber optic cabling.
  • Optical transceivers (SFP and QSFP modules). Small plug-in modules that convert electrical signals in a switch into light for the fiber, and back again.
  • Media converters. Bridge a copper link to a fiber link when a run is too long for copper or passes through an area with heavy electrical noise.
  • Repeaters and extenders. Boost or regenerate a signal so it can travel farther than the medium normally allows.
  • Antennas and transmitters. Used for Wi-Fi, cellular, two-way radio and point-to-point wireless links between buildings.
  • Multiplexers. Combine several signals onto one link, such as multiple wavelengths of light on a single strand of fiber, so one cable can carry far more traffic.

4. Voice and Communications System Devices

Phones, paging and intercom

Businesses rely on a group of devices built specifically for voice communication across a building or campus.

  • PBX and IP-PBX systems. A private branch exchange is the business phone system that handles extensions, call transfers, voicemail and outside lines. Modern systems are IP-based and often cloud-hosted, but still need a cable to every desk phone. Learn more about VoIP cabling.
  • Overhead paging systems. Ceiling speakers, horns and amplifiers used to make announcements in warehouses, schools, retail stores and medical offices. See overhead paging systems.
  • Intercom and door stations. Audio or video stations at entrances and gates that let staff see and talk to visitors and release the door. See intercom systems.
  • Emergency phones and area-of-rescue call stations. Required in many commercial buildings, especially at elevators, stairwells and parking structures.

5. Telecom Room Hardware

Holds it all together

Behind every working network is a telecom room, often called the MDF (main distribution frame) and IDF (intermediate distribution frame) on larger sites. The hardware there does not send messages itself, but it organizes, protects and powers the devices that do.

  • Network racks and cabinets. Two-post and four-post racks hold switches, routers, patch panels and servers. In California, racks should be anchored and seismically braced.
  • Patch panels. Every cable from the floor terminates on a patch panel, where short patch cords connect it to the switch. This makes moves and changes quick and keeps the room traceable.
  • Fiber enclosures. Rack-mount housings where fiber strands are spliced and terminated on LC or SC connectors.
  • PoE switches and injectors. Deliver power and data to phones, cameras and access points over one cable. IEEE 802.3bt PoE provides up to 90 W at the switch port.
  • UPS and power distribution. Battery backup units that keep the network and phones running through short power outages.

A well-built room is labeled, tested and documented so your IT team can trace any connection in minutes. That is the core of an MDF / IDF build-out.

6. Security and AV Devices on the Network

Cameras, access and displays

Security and audio-visual equipment used to run on separate wiring. Today, most of it connects to the same data network, which makes it part of your telecommunication system.

  • IP security cameras and NVRs. Cameras send video over Ethernet, usually powered by PoE, to a network video recorder or cloud service. See security camera cabling.
  • Access control readers and controllers. Card and mobile credential readers that communicate with a controller to unlock doors. See access control wiring.
  • Displays and conference room systems. Screens, codecs, microphones and table connectivity for meetings and presentations. See conference room AV installation.

Telecommunication Devices Quick Reference

Common telecommunication devices, what they do and how they connect
Device What it does Typical connection Where you find it
VoIP phoneSends and receives voice as dataCat6 with PoEDesks, reception, break rooms
Computer / laptopSends and receives data, email, videoCat6 or Wi-FiWorkstations
Modem / ONTConnects the building to the internet providerCoax, copper or fiber from the providerMDF or main telecom room
Router / firewallDirects and filters traffic between networksEthernet or fiber uplinksMDF rack
Network switchConnects wired devices inside the buildingPatch cords to patch panels; fiber uplinksMDF and IDF racks
Wi-Fi access pointTurns the wired network into Wi-FiCat6A with PoECeilings and high walls
Optical transceiverConverts electrical signals to light and backPlugs into switch; connects to fiberSwitches in every telecom room
IP-PBXManages extensions, calls and voicemailEthernet; internet or SIP trunksMDF or cloud-hosted
IP cameraSends live video to a recorderCat6 or Cat6A with PoEEntrances, parking, hallways
Intercom stationTwo-way audio or video at doors and gatesCat6 with PoEEntrances, gates, lobbies

What Telecommunication Devices Need From Your Cabling

The devices get the attention, but the cabling behind them decides how well they perform. Here is what to keep in mind before you buy new equipment or move into a new space:

  • Check the PoE budget. Wi-Fi 7 access points, PTZ cameras and some displays draw more power than older devices. Make sure your switches and cabling can deliver it, and that bundles are sized so cable does not overheat.
  • Use Cat6A for high-demand devices. Modern access points use multi-gigabit uplinks, and Cat6A supports 10 Gbps across the full 100 meter channel.
  • Use fiber between rooms and buildings. Fiber handles long distances and high bandwidth without electrical interference.
  • Plan device locations early. Access points, cameras and paging speakers need a cable run to the exact mounting spot, which is much easier during a build-out than after the ceiling is closed.
  • Label, test and document everything. Certified, labeled cabling lets you add or replace devices without guessing which port goes where. Learn about network cabling testing and certification.

If you are not sure who handles this work, read what a telecommunications contractor is. A licensed contractor installs the cabling and mounts and connects the devices so they work on day one.

Adding phones, cameras or Wi-Fi in the Bay Area? Call (628) 215-7235 for a site walk.

Request a quote

Frequently Asked Questions

What are telecommunication devices?

Telecommunication devices are any equipment that sends, receives, routes, switches or carries information over a distance using electrical, optical or radio signals. Examples include telephones, smartphones, computers, modems, routers, network switches, Wi-Fi access points, fiber optic transceivers and IP-PBX phone systems.

What are 5 examples of telecommunication devices?

Five common examples are a telephone or VoIP handset, a smartphone, a modem, a router and a Wi-Fi access point. In a business, network switches, IP cameras, intercom stations and video conferencing systems are also telecommunication devices.

Is a computer a telecommunication device?

A computer becomes a telecommunication device when it uses a network connection to send or receive information, such as email, web browsing or a video call. Its network adapter is the part that actually handles the telecommunication.

What is the difference between a modem and a router?

A modem connects your building to the internet service provider by converting the provider’s signal into data your network can use. A router directs that data between your internal network and the internet and between devices on different networks. Many small-office units combine both in one box.

Do telecommunication devices need special cabling?

Most business telecommunication devices connect through Cat6 or Cat6A Ethernet cabling, and many draw power through the same cable using Power over Ethernet. Wi-Fi 6E and Wi-Fi 7 access points and PTZ cameras work best on Cat6A, while links between telecom rooms usually run on fiber.

Keep Reading

Talk to a San Francisco Telecommunications Contractor

Send a floor plan, drop count or a description of the problem, and we’ll schedule a site walk and return an itemized quote, usually within two business days.

San Francisco Telecom Techs
One Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]