What Are the Two Types of Contractors?
Quick answer: The two types of contractors are general contractors and specialty contractors. A general contractor runs the whole project and coordinates every trade on the job. A specialty contractor performs one specific trade, such as electrical, plumbing, HVAC or telecommunications cabling, and is often hired as a subcontractor by the general contractor.
If you’re planning an office buildout, a tenant improvement or a network upgrade in San Francisco, knowing which type of contractor you need saves time, money and a lot of back-and-forth. Here’s how the two types differ, how California licenses them, and where a telecommunications contractor fits in.
1. What Is a General Contractor?
A general contractor (often shortened to “GC”) is the company responsible for delivering an entire construction project. They usually contract directly with the property owner or tenant, then hire and manage the individual trades needed to finish the job.
On a typical commercial project, the general contractor handles:
- Scheduling and sequencing so framing, electrical, cabling, drywall and finishes happen in the right order.
- Hiring subcontractors for each specialized trade and holding them to the contract.
- Permits and inspections with the city or county building department.
- Budget and change orders when the scope shifts mid-project.
- Site safety and coordination with property management, especially in occupied buildings.
Think of the general contractor as the project’s quarterback. They may have their own crews for carpentry or demolition, but most of the specialized work is done by other licensed companies working under them.
2. What Is a Specialty Contractor?
A specialty contractor (also called a trade contractor) focuses on one area of work and holds the license, tools and training for that trade. Common examples include electricians, plumbers, HVAC installers, roofers, painters, fire sprinkler fitters and low-voltage or telecommunications contractors.
Specialty contractors are frequently hired as subcontractors by a general contractor. But they can also be hired directly by the owner or tenant when the project only involves their trade. A business adding twenty network drops, for example, doesn’t need a general contractor in the middle. It can call a licensed cabling contractor directly.
Because specialty contractors do the same type of work every day, they bring deeper technical knowledge to their trade, including the specific codes, standards and testing requirements that apply to it.
3. General vs. Specialty Contractors at a Glance
| General contractor | Specialty contractor | |
|---|---|---|
| Scope of work | Entire project, multiple trades | One trade or system |
| Who hires them | Property owner, developer or tenant | A general contractor, or the owner/tenant directly |
| Main role | Manage, schedule, coordinate and oversee | Install, repair and test their specific system |
| California license | Class B (General Building) or Class A (General Engineering) | Class C specialty license, such as C-10 Electrical or C-7 Low Voltage Systems |
| Best for | Full buildouts, remodels and new construction | Single-trade jobs, upgrades, repairs and add-ons |
| Telecom example | Manages a full-floor tenant improvement | Pulls, terminates and certifies the Cat6A and fiber cabling |
4. How California Licenses Contractors
In California, contractors are licensed by the Contractors State License Board (CSLB). The CSLB actually groups licenses into three classifications, but two of them are “general” licenses, which is why most people still talk about two types of contractors:
- Class A – General Engineering: Large fixed works that require specialized engineering knowledge, such as roads, bridges, utilities, pipelines and earthwork.
- Class B – General Building: Buildings and structures that involve at least two unrelated building trades. This is the license most commercial and residential general contractors hold.
- Class C – Specialty: Dozens of individual trade licenses, each covering one type of work. Examples include C-10 Electrical, C-20 HVAC, C-36 Plumbing and C-7 Low Voltage Systems.
So when you hear “general contractor,” it usually means a Class A or B license holder. When you hear “specialty contractor” or “subcontractor,” it usually means a Class C license holder.
Before hiring any contractor in California, you can confirm their license number, classification and status for free using the license lookup on the CSLB website. Make sure the classification on the license matches the work you’re hiring them for.
5. Where Telecommunications Contractors Fit
A telecommunications contractor is a specialty contractor. In California, communication and data cabling work generally falls under the C-7 Low Voltage Systems license, which covers energy-limited communication and low-voltage systems.
That includes the infrastructure most businesses rely on every day:
- Network cabling such as Cat6 and Cat6A Ethernet drops
- Structured cabling, racks, patch panels and MDF/IDF telecom rooms
- Fiber optic cabling, splicing and OTDR testing
- Wi-Fi access points and PoE infrastructure
- VoIP, paging and intercom wiring
- Security camera and access control cabling
On a large tenant improvement, a telecom contractor typically works as a subcontractor under the general contractor, coordinating cable pulls around framing, electrical and ceiling work. On smaller projects, like adding drops, cleaning up a messy telecom room or upgrading Wi-Fi, businesses usually hire the telecom contractor directly.
A telecom contractor is also different from the carriers and internet providers that sell you phone and internet service. Those businesses run the outside network and stop at your building’s demarcation point, while the contractor handles everything inside. For a breakdown of who does what, see What Are Telecommunications Companies?
6. Other Ways People Use “Two Types of Contractors”
Depending on context, you might see the phrase used in two other ways:
Prime contractor vs. subcontractor
This describes the contract relationship, not the trade. The prime contractor signs the contract with the owner. The subcontractor signs with the prime contractor. A specialty contractor can be either one, depending on who hired them. This terminology is especially common in government and public works projects.
Independent contractor vs. employee
In employment and tax discussions, “contractor” often means an independent worker who isn’t on payroll. That’s a different topic entirely and has nothing to do with construction licensing. If you’re researching this meaning, California’s employment rules are worth reviewing with an HR or legal professional.
7. Which One Should You Hire?
A simple rule of thumb: if your project involves several trades, start with a general contractor. If it involves only one system, go straight to the specialist. Here’s how that plays out for common telecom projects:
Adding or moving network drops
Hire a telecom contractor directly. No walls are being built, so a general contractor would only add cost and an extra layer of communication.
Fixing slow Wi-Fi or dead zones
Hire a telecom contractor directly for a wireless survey, new access point drops and PoE upgrades.
Full-floor tenant improvement
Hire a general contractor to run the project, and ask that a licensed C-7 contractor handle the cabling. You can also recommend a cabling contractor you trust.
Office relocation
If the new space only needs cabling and a telecom room, a telecom contractor can handle it directly. If it needs construction, coordinate through the general contractor.
Before you hire, it helps to know exactly what a cabling specialist should cover, from licensing and testing to documentation. Our guide What Is a Telecommunications Contractor? walks through what to expect.
8. Frequently Asked Questions
What are the two types of contractors?
General contractors, who manage an entire project and coordinate multiple trades, and specialty contractors, who perform one specific trade like electrical, plumbing or telecommunications cabling.
Is a subcontractor the same as a specialty contractor?
Not exactly. “Specialty contractor” describes what a company does. “Subcontractor” describes who hired them. Most subcontractors are specialty contractors, but a specialty contractor can also be hired directly by a property owner or tenant.
What type of contractor installs network cabling in California?
Network, data and voice cabling is typically installed by a specialty contractor holding a California C-7 Low Voltage Systems license.
Do I need a general contractor to add network drops to my office?
Usually not. If the job is limited to cabling, you can hire a licensed low-voltage contractor directly. A general contractor is typically needed when the project involves multiple trades such as walls, electrical, HVAC and finishes.
Need a Licensed Telecommunications Contractor in San Francisco?
Whether you’re working with a general contractor on a full buildout or just need a few drops added, San Francisco Telecom Techs installs, tests and certifies network cabling, fiber, Wi-Fi and low-voltage systems across San Francisco and the Bay Area.
San Francisco Telecom TechsOne Beach St, San Francisco, CA 94133
Phone: (628) 215-7235
Email: [email protected]
Get a site walk and itemized quote. Call (628) 215-7235.
Request a quote